4-Pin Trailer Adapter for Side X Side
4-Pin Trailer Adapter for Side X Side
This All New wiring harness will allow your trailer (with a 4-pin trailer connector plug) to have brake lights when being towed by your SxS. *And if paired with one of our turn signal kits, this will allow the use of the turn signals on the trailer as well.
Included is a dust cap over the trailer 4-pin connector.
The Turn Signal option is compatible with our Turn Signal Kit and allows the Trailer to work with Turn Signals and Brake lights.
Fits the following Side X Sides:
- 2018+ Polaris General
- 2019+ Polaris Ranger*
- 2022+ Polaris Ranger SP 570
- 2018+ Polaris RZR**
- 2024+ Polaris RZR XP 1000 (New Model)
- 2022+ Polaris RZR Pro R/ Turbo R
- 2018+ Can-Am X3
- 2022+ Can Am Commander 1000
- 2019+ Can Am Defender
- 2024+ Polaris Xpedition
- 2024+ Polaris Ranger XD1500
- 2024+ CF Moto Uforce 1000
- 2025+ CF Moto Uforce U10 Pro & Pro XL
- 2025+ CF Moto Uforce 800 (WD Electronics kit is required for compatibility of this adapter)
- 2020-2024 Polaris RZR Pro XP
- 2019+ Can Am Maverick Trail / Sport
- 2024+ Can Am Maverick R
- 2015+ Kawasaki Mule
- 2026+ Can Am Defender HD11
- 2026+ Polaris Ranger 500
- 2021+ Yamaha Wolverine RMAX
*For Rangers, lift your bed and verify you have a 4 pin or an 8 pin connector near the back middle under the tailgate/bed. Choose either the 4-pin or 8-pin selection on this page.
**Only compatible with RZR 8-pin connectors. Check on the drivers' side under the bed for an 8-pin connector. If you have a 4 pin connector, this is not compatible. Give us a call.
-
Important Notes
*For Rangers, lift your bed and verify you have a 4 pin or an 8 pin connector near the back middle under the tailgate/bed. Choose either the 4-pin or 8-pin selection on this page.
**Only compatible with RZR 8-pin connectors. Check on the drivers' side under the bed for an 8-pin connector. If you have a 4 pin connector, this is not compatible. Give us a call.
***This trailer adapter only works with trailer with LED taillights. Incandescent bulbs draw too much power causing the lights to work sporadically or not at all.
-
Installation Resources
2018+ Polaris Ranger (8-pin) Trailer Adapter
2018+ Polaris Ranger (4-pin) Trailer Adapter
2022+ Polaris Ranger SP 570 Trailer Adapter
2018+ Polaris General Trailer Adapter
2015-2020 Polaris RZR (4-pin) Trailer Adapter
2018-2024 Polaris RZR (8-pin) Trailer Adapter
2022-2024 Polaris RZR Pro R Trailer Adapter
2024+ Polaris RZR XP 1000 Trailer Adapter
Polaris Xpedition Trailer Adapter
Polaris Ranger XD 1500 Trailer Adapter
2020-2024 Polaris RZR Pro XP Trailer Adapter
2025+ Polaris RZR Pro XP, Pro S, Pro R Trailer AdapterCan Am Defender Trailer Adapter
Can Am Commander Trailer Adapter
Cam Am Maverick X3 Trailer Adapter
Can Am Maverick Trail / Sport Trailer Adapter
Can Am Maverick R Trailer Adapter
Can Am Defender HD112024+ CF Moto Uforce 1000 Trailer Adapter
2025+ CF Moto Uforce U10 & U10XL (including Highland) Trailer Adapter
CF Moto Uforce 800 XL Trailer Adapter
Kawasaki Ridge Trailer Adapter
Kawasaki Mule Trailer Adapter
Honda Pioneer 700 Trailer Adapter
2018+ Yamaha Wolverine 850 X4 Trailer Adapter
2021+ Yamaha Wolverine RMAX
Took about 12 hours to install the turn signal kit and trailer harness. Started it up and everything worked. Still need to program the auto cancel; unsure if I will though. The inside blue turn indicators is very visible through the steering wheel. Had a meticulous friend install all of it. The inside of the steering column had another inside layer that needed to be cut for the lever, not just the outside. The install video was required to install this. Thanks nice setup.
Work great easy to install should have wire covering on it
In future it would be easier if the connection on their placement would be labeled. Otherwise, the adapter works as it was intended.
easy to install works great
Fit and hook up were perfect. But I don't remember seeing info that if you don't have "their" turn signal switch, the Blinkers won't work. Does have tail lights and brake lights.